From low-pressure to high-pressure piping demands, and from plastics to metals, Oatey® offers pipe joint compound solutions for every type of job. Available in the Masters®, Oatey®, and Hercules® brands, these thread sealant paste products help you get the job done right.
Thread Sealant Paste

Filter by
Filter by
Product Type
Brand
Color / Finish
Material Compatibility
Maximum Application Temperature °C
Maximum Application Temperature °F
California VOC Compliant
Set Speed
Set Type
Showing 8 of 8
There are no results available
Helpful Resources
Videos
FAQs
What pipe joint compounds should I use in an approved piping system filled with natural gas?
The following Oatey pipe joint compound products are approved for use in this application: Oatey Great Blue, Hercules Block, Hercules Grrip, Hercules Megaloc, Hercules Pipe Joint Compound, Hercules Pro Dope or Hercules Real-Tuff are all safe for this application.
What is the curing time for pipe joint compound?
Under normal pressures the pipe joint compounds does not need a curing time. If the pressure in the lines is 125psi or higher, the recommended cure time is 4 hours before initiating pressure. Call Oatey Customer Service when in doubt.
Can pipe joint compound and thread sealant tape be used on the same joint?
Yes. Once the male threads are wrapped properly you can apply a coating of pipe joint compound over the thread sealant tape before assembling the joint. Remember that you only apply pipe joint compound to the male threads.
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.