Oatey® and Masters® Shower Pan Liners are designed as an economical, flexible pan liner for use in tile shower and other concealed waterproofing applications. Shower Pan Liners are available in 30 mil or 40 mil thickness, PVC or CPE materials, and widths of 4', 5' or 6'. Liner is marked every 6" to allow for easy measuring of material.
Membranes

Showing 5 of 5
There are no results available
Helpful Resources
Videos
FAQs
How thick should I pour concrete below shower pan liner?
This depends on the quality of the cement products you are using and the minimal thickness recommended by that specific manufacture. The normal rule is ¼” thick starting at the outside of the flange, then the concrete is sloped up and away from the drain at ¼” per foot.
What type of concrete do I use when I install the shower pan liner?
The approved products for this application are bagged Portland Sand mix, or cement
mix for the base and top coatings. If you are going to mix and match, you must use Portland sand mix under the liner.
How do I install a shower pan?
If you contact our customer service department, they would be happy to send you a full set of step by step installation instructions. You can also visit our website and watch our how-to video showing a shower pan installation.
Oatey Blog
Case Studies
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.